
|  |
| |
|
|
|
|
|
It's a hard life |
|
| |
|
 |
|
| |
|

|
|
Robust inductive proximity sensors for metalworking industry. Designed for areas where metal parts are unavoidably in contact with the proximity sensors, the new Robust series available now from sensor market leader ifm electronic are brand new inductive proximity sensors with housing completely in stainless steel, including the sensing face. As a further measure, the entire sensor and the locknuts supplied feature a brand new long-lasting anti-spatter coating. This coating is so good that weld spatter bounces off or can be wiped away with a finger. As market leader ifm electronic understands that reliable sensing is key; and that is what these new units offer. There are no extravagant claims for sensing range made for these devices, just a common sense approach. The efector R series will achieve the stated sensing range reliably. It goes without saying that the ifm devices can be mounted in accordance with normal standards and practice, i.e true flush-mounting and normal spacing between sensors. These new all stainless-steel sensors are available in M12, M18 and M30 versions with sensing ranges of 4mm, 6mm and 12mm respectively. Thoroughly tested on an impact and abrasion simulator, the R series will last significantly longer than conventional sensors, and the coating will also withstand the abrasion for longer than conventional coatings. For more information on efector R series
|
|
|
|