Position sensors and object recognition
Capacitive sensors especially for the plastics industry. Colour sensor in a compact O5 housing ecolink M8 - the secure connection Inductive ring and tube sensors Opto family O7 – small, compact, precise Power supplies made by ifm Safety relay for the protection of operators and machinery T-slot cylinder sensors in hazardous atmospheres. ifm light curtains: Light frame, long reach Splitter with ecolink technology, the secure connection ecolink M12 for ATEX applications Fail-safe inductive sensor directly detects metal Inductive sensors for hazardous areas Inductive slot sensors OG BasicLine in plastic Safety relay with semiconductor outputs T-slot reed sensors The new generation of CANopen encoders Valve position in a new light Inductive sensors for heavy duty Inductive sensors for metalworking and welding applications O5 for hazardous dust areas 3D camera: a brilliant innovation Optoelectronics OG BasicLine now in plastic Optoelectronics: sensing in 3D Robust optical fork and angle sensors Capacitive sensor of the KQ series reduces type versions New OBF fibre-optic amplifiers Archive
Fluid sensors and diagnostic systems Bus system AS-Interface Control systems Identification systems
 
Rectangular inductive sensors for easy mounting.
 
 

 
 Sensors for use in conveying.
  • Corner LEDs clearly visible in any mounted position.
  • Very long sensing ranges up to 40 mm.
  • Integrated clamp.
  • Freely selectable sensing face with 5 positions.
  • Versions in 3-wire and 4-wire technology.

Applications
The new inductive rectangular type IMC (40 x 40 mm) is specially suited for use in conveying. Now, there are also electromagnetic field immune and Teflon-coated units for welding applications.

Versions
The various versions of the IMC design are available in 3-wire or 4-wire technology, with correction factor 1 or specially for welding areas.

Installation
By loosening the adjusting screw, the sensing face can be rotated to 5 different positions and thus be optimally adapted to your applications. The two clearly visible corner LEDs allow the switching status and operating status to be seen even under adverse installation conditions.

IM5115 – Design 40 x 40 x 66 mm, sensing range 20 mm flush mountable, 3-wireIM5116 – Design 40 x 40 x 66 mm, sensing range 35 mm non flush mountable, 3-wireIM5117 – Design 40 x 40 x 66 mm, sensing range 40 mm non flush mountable, 3-wire

IM5123 – Design 40 x 40 x 66 mm, sensing range 20 mm flush mountable, 4-wireIM5134 – Design 40 x 40 x 66 mm, sensing range 35 mm non flush mountable, 4-wireIM5136 – Design 40 x 40 x 66 mm, sensing range 40 mm non flush mountable, 4-wire

IM5128 – Design 40 x 40 x 66 mm, sensing range 20 mm flush mountable, 3-wire, K=1IM5130 – Design 40 x 40 x 66 mm, sensing range 35 mm non flush mountable, 3-wire, K=1IM5131 – Design 40 x 40 x 66 mm, sensing range 40 mm non flush mountable, 3-wire, K=1

IM5132 – Design 40 x 40 x 66 mm, sensing range 20 mm flush mountable, 4-wire, K=1IM5133 – Design 40 x 40 x 66 mm, sensing range 35 mm non flush mountable, 4-wire, K=1IM5135 – Design 40 x 40 x 66 mm, sensing range 40 mm non flush mountable, 4-wire, K=1

IM5119 – Design 40 x 40 x 66 mm, sensing range 20 mm flush mountable, 3-wire, K=1, electromagnetic field immuneIM5120 – Design 40 x 40 x 66 mm, sensing range 35 mm non flush mountable, 3-wire, K=1, electromagnetic field immuneIM5129 – Design 40 x 40 x 66 mm, sensing range 35 mm non flush mountable, 3-wire, K=1, electromagnetic field immune

IM5124 – Design 40 x 40 x 66 mm, sensing range 20 mm flush mountable, 4-wire, K=1, electromagnetic field immune, Teflon-coated housingIM5125 – Design 40 x 40 x 66 mm, sensing range 35 mm non flush mountable, 4-wire, K=1, electromagnetic field immune, Teflon-coated housingIM5126 – Design 40 x 40 x 66 mm, sensing range 40 mm non flush mountable, 4-wire, K=1, electromagnetic field immune, Teflon-coated housing


Further information: Bulletin (PDF-file 243 kB).